一、Product Introduction

Complies with the requirements of standards including GB/T50081-2008 (Long-term Performance and Durability Test Method for Ordinary Concrete), JG/T249-2009, T0528-94, and GBJ81-85.

二、Technical Parameters

maximum pressure of test	1.2Mpa
test pressure resolution	0.01MPa
Relative error of the test pressure reading	±0.015MPa
test pressure holding error	±0.05MPa
Number of test samples per test	36个
Maximum pressure for specimen sealing	3.0MPa
sealing pressure resolution	0.01MPa;
Sealing method for the specimen	Water seal, safe and stable
Test pressure pressurization method	Top-down pressure
The overall structural form of the machine	Shelf-type structure with automatic elevation for each group, supporting specimen placement up to 1600mm
Lifting method for each floor	Electric lift, safe and fast
mold cavity size	Top opening: 180mm, bottom opening: 190mm, height: 155mm
Height of the specimen’s sealing sleeve	142mm
Material of the specimen bucket	5mm High Strength Sheet Formed by One Time Stamping
Material of the specimen’s sealing sleeve	Special imported materials with high wear resistance and high pressure resistance
Water seepage detection methods	The top surface sensor of the specimen detects the situation promptly and accurately.
Test report	Automatically generate test reports and customize report templates based on customer requirements (costs incurred by the customer)
Power supply	380V-50HZ
Total power	2000W
Overall dimensions	2500x950x2400m
weight	About 2000Kg