The CX-RZ800 solid waste combustion calorific value tester is suitable for the determination of the combustion calorific value of solid waste and domestic garbage, and complies with the national standard CJ/T313-2009 “Sampling and Analysis Methods for Domestic Garbage”.

Performance features of the solid waste combustion calorific value tester

1. It adopts a compressor refrigeration method to automatically and rapidly adjust the temperature of the inner and outer cylinders, reducing the cooling correction coefficient and making the measurement results more accurate.
2. Comply with the provisions of the national standard that “at the end, the inner cylinder is about 1K higher than the outer cylinder.”
3. The calorimeter retains all the functions of the microcomputer system and can simultaneously run general software to handle other tasks. It can automatically mark the energy equivalent (heat capacity) of the calorimeter system and measure the calorific value. Input data such as sulfur, moisture, and hydrogen, and you can convert and print out data such as the calorific value of the cartridge, high calorific value, and low calorific value.
4. The inner cylinder of the calorific value meter device adopts electric stirring with sheet-like blades, while the outer cylinder uses submersible electric stirring, which makes the stirring more uniform and convenient. The fuse type cotton thread ignition method is adopted.
5. The calorific value meter runs on Windows XP or above operating systems. The entire process is prompted in Chinese characters, featuring human-computer interaction. It is easy to learn and use. Just follow the prompts to complete the test.

Technical parameters of solid waste combustion calorific value tester：

The heat capacity is approximately 10,500 J/K

The capacity of the external water tank is approximately 51 liters

The capacity of the inner water tank is approximately 2.1 liters

Ignition voltage: 20V

The ignition time is controlled by a program

The measurement accuracy is superior to the national standard CJ/T313-2009

Temperature resolution: 0.0001℃

Operating environment: 5-40℃ (Room temperature variation for each measurement should be ≤1℃, relative humidity ≤80%)

Power supply: 220V±10%