This instrument adopts an optical fiber conduction detection method, which is completely different from the ordinary light spot tube detection method used by other manufacturers. The detection part uses advanced sensors and high-precision AD conversion circuits, and the main control part uses multiple industrial-grade, high-reliability 16-bit RISC structure, ultra-low power consumption microprocessors. This enables the fully automatic completion of all tasks in the kinematic viscosity measurement process, including automatic heating and constant temperature control, liquid level detection, timing, cleaning of viscosity tubes, and printing. Main features: 1. 10-inch color touch screen, one-key completion of kinematic viscosity measurement 2. The detection part adopts a dedicated high-precision sensor and a high-precision AD conversion circuit 3. The instrument is preset with 4 groups of measurement parameters for selection when testing different samples, facilitating the detection operation 4. Infrared liquid level detection is not affected by indoor light or lamplight 5. The measurement process includes: constant temperature, viscosity test, cleaning, and drying, all of which are automated. 6. Automatically store 100 test results, which can be viewed or printed at any time. Main technical indicators: Display: 10-inch color touch screen Temperature range: Room temperature ～ +100°C, accuracy ±0.01°C Temperature correction: Fully automatic calibration, programmable calibration Measurement range: 0.5-5000cSt(mm2/s)/40℃…

The kinematic viscosity tester is applicable to standards such as “GB265-88 Test Method for Kinematic Viscosity of Petroleum Products” and ASTM D445. It adopts a precision digital temperature controller to control temperature, with digital temperature display, high temperature control accuracy, digital stopwatch timing, and uniform temperature in the constant temperature bath. It can hold four viscometers for experiments at the same time and can also be used as a high-viscosity constant temperature water bath for other experiments. Professional Features of Kinematic Viscosity Tester: 1.A precision digital temperature controller is used to control the temperature inside the bathtub, with a high-brightness digital stopwatch for timing, which is accurate and easy to use. 2.10-liter constant temperature bathtub with an outer layer of plexiglass insulation cover, ensuring uniform temperature distribution in the bath and good temperature control effect. 3.Components such as the heater are made of stainless steel, which is corrosion-resistant and durable. It is equipped with a ring-shaped fluorescent lamp for easy observation. 4.Four viscometer mounting holes allow parallel testing of more than two oil samples at the same time. 5.The capillary meter card adopts a three-point vertical type, which is flexible and convenient to operate, and the clamping is reliable. Technical…

This instrument is suitable for determining the kinematic viscosity and dynamic viscosity of liquid petroleum products (referring to Newtonian liquids). This method involves measuring the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity at a constant temperature. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature.     It is applicable to standards such as “GB265-88 Determination of Kinematic Viscosity of Petroleum Products” and ASTM D445. It adopts a precision digital temperature controller to control temperature, with digital temperature display, high temperature control accuracy, digital stopwatch for timing, and uniform temperature in the thermostatic bath. It can accommodate four viscometers for experiments simultaneously and can also be used as a high-viscosity thermostatic water bath for other experiments. Main Features:  1. A precision digital temperature controller is used to control the temperature inside the bathtub, and a high-brightness digital stopwatch is used for timing, which is accurate and easy to use.  2. 10-liter constant temperature bathtub, with an outer layer of plexiglass insulation cover, uniform temperature distribution in the bath, and good temperature control effect  3. Components such as the…

This instrument complies with standards such as GB265 “Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity of Petroleum Products” and ASTM D445. It is suitable for measuring the kinematic viscosity and dynamic viscosity of liquid petroleum products (referring to Newtonian liquids). This method involves measuring the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity at a constant temperature. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature. It is widely used in industries such as electrical oil, electric power, chemical industry, railway, and scientific research. Main Features: 1. Adopts single-chip microcomputer intelligent temperature control with a temperature control accuracy of 0.01℃; 2. Chinese and English LCD display, which timely shows the working status of the instrument such as temperature, time, and parameters; 3. The instrument automatically calculates the kinematic viscosity value, and automatically prints and stores the measurement results; 4. Timing from 0.1 seconds to 999.9 seconds, with a temperature range from -35.00℃ to 100.00℃ that can be set arbitrarily; 5. The double-layer constant temperature glass bath is equipped with an outer plexiglass…

This instrument complies with standards such as GB265 “Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity of Petroleum Products” and ASTM D445. It is suitable for measuring the kinematic viscosity and dynamic viscosity of liquid petroleum products (referring to Newtonian liquids). This method involves measuring the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity at a constant temperature. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature. It is widely used in industries such as electrical oil, electric power, chemical industry, railway, and scientific research. Main features: 1. Chinese and English LCD display, using single-chip microcomputer for intelligent temperature control with a temperature control accuracy of 0.01℃; 2. 4 viscometer test hole design, unique modular technology, capable of measuring both low and high viscosity ranges; 3. The instrument automatically calculates the kinematic viscosity value, and automatically prints and stores the measurement results; 4. Double-layer constant temperature glass bathtub with an outer plexiglass insulation cover, ensuring uniform temperature distribution in the bath and good temperature control effect; 5. Components such as heaters are made…

BCYD-600 Kinematic Viscosity Tester is applicable to standards such as GB265 “Determination of Kinematic Viscosity of Petroleum Products”. At a constant temperature, it measures the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature. This instrument uses a digital temperature controller to control the temperature, with digital temperature display, high temperature control accuracy, digital stopwatch timing, and uniform temperature in the thermostatic bath. It can hold four viscometers for experiments at the same time and can also be used as a high-viscosity thermostatic water bath for other experiments. Main Features: 1. Adopts a digital temperature controller to control the temperature in the bath, which is fast and stable with an accuracy of 0.1 degree. 2. 0.1-second to 999.9-second high-brightness nixie tube stopwatch timing, accurate and easy to use. 3. Double-layer thermostatic glass bath, with uniform temperature distribution in the bath and good temperature control effect. 4. Components such as heaters are made of stainless steel, which is corrosion-resistant and durable. The circular fluorescent lamp provides illumination…

This instrument complies with standards such as GB265 “Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity of Petroleum Products” and ASTM D445. It is suitable for measuring the kinematic viscosity and dynamic viscosity of liquid petroleum products (referring to Newtonian liquids). This method involves measuring the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity at a constant temperature. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature. It is widely used in industries such as electrical oil, electric power, chemical industry, railway, and scientific research. Main Features: 1. 65K (resolution 800*600) Chinese and English touch LCD display with menu prompt operation; 2. Adopting single-chip microcomputer intelligent temperature control, the temperature control range can be arbitrarily set from room temperature to 200.00℃, with a resolution of 0.001℃; 3. 4 viscometer test hole design, unique modular technology, which can measure both low viscosity and high viscosity ranges; 4. Suitable for determination methods such as Saybolt viscometer, Ubbelohde viscometer, reverse flow viscometer, Ostwald viscometer, etc.; 5. The instrument automatically calculates kinematic viscosity value and dynamic viscosity…